ESTechnologies has designed the first 
Lithium-Polymer battery with Lloyds Certificate in the world. This battery is
specially designed and certified for Marine applications and large Energy
storage systems in the most harsh environment.
Energy storage
With a Lithium Polymer Battery
you can create energy storage in a cost effective manner, reducing fuel and
therefore making  a contribution to a better environment. Reduction of CO2
emissions, and energy which normally gets lost, will now be saved and stored by
means of optimized power management.


This makes the use of  energy more efficiently. This is due to the special
qualities of the lithium polymer cells. Firstly, the chemical composition of the
battery, using non corrosive chemicals which guarantees long lifetime and little
wear.


Secondly, the use of polymer technology allows to make batteries with
extremely high efficiency and low impedance(lowest on the market).


The polymer technology and the chemical composition makes it possible to
realize an extremely high number of charge / discharge cycles, over 5000 cycles,
with a long lifetime.


With these cells ESTechnologies produces high voltage and high power battery
systems. For this purpose, 51.8 Vdc battery blocks have been developed with a
capacity of 100Ah or 200Ah.


The battery blocks are built with only 14 large single cells instead of
(most common), hundreds of small cells. This contributes to the already high
reliability of the battery systems.


Battery Management System
To guarantee the
extensive lifetime of this battery, ESTechnologies has also designed a unique
Battery Management System with constantly active balancing. Unlike any other
system available on the market today, this Battery Management System has superb
specifications. It can balance energy between cells within one battery unit and
even between cells of different battery units connected in one system. This is
all achieved with minimal losses. Special care has been taken to ensure safety
at all times. High DC voltage is present at large energy storage systems and
additional safety measures are built into the battery module itself.


The batteries communicate with other modules and system controllers like
NMEA2000 devices. The 50V battery modules are constructed for durability with
just 14 large LiPo cells in series and a reduced amount of parts.


Each cell has its own chemical process. Therefore a balanced system is
needed. EST uses an in-house developed, state of the art, active balancing and 
monitoring board for each module. If there is an imbalance in the system, a part
of the energy will be transported from the highest cell  to the lowest cell.
Result: The EST modules are always 100% balanced.


The required voltage is realized by connecting batteries in series, the
required power can be obtained by connection these battery series  in parallel.
ESTechnologies is responsible for the complete supply and installation of the
complete system including battery, total battery management and safety
features.


Because of working with a high DC voltage, safety has top priority and is
included in the overall design philosophy. The housing and connectors are fully
protected and have IP65 rating.


Further Development
ESTechnologies is still
improving their batteries and have now made a very important step forward. They
have found positive improvements regarding the weight of the
batteries.
ESTechnologies has succeeded to reduce the weight of their
batteries with 12% from 85 kg to 75 kg.  This by using a new cell which is
lighter and by improving the mounting frame on the inside.


Other Specifications of ESTechnologies batteries
are:


• Lloyd’s Certified with Lloyd’s Certified power connections
• Certified
for high DC voltage systems
• Have a charge and discharge efficiency of more
than 95%
• Configurable for Mega-Watt applications
• Very light weighted
and ultra-compact in size
• Designed for large energy storage systems
•
Maintenance free
• Environmental friendly (100% recyclable)
• 10 years
limited warranty